3.5.3 FRAME MR6
Table 7: The content of the accessories bag
Item Quantity Description
M4x20 screw 10 Screws for the grounding clamps for cable
shield (6), and the grounding clamps for
grounding conductor (4)
M4x16 screw 3 Screws for the control cable clamps
M4x8 screw 1 Screw for the optional grounding
M5x12 screw 1 Screw for the external grounding of the drive
Grounding clamp for control cable 3 Control cable grounding
Grounding clamp for cable shield, size M32 1 Clamping the brake resistor cable
Grounding clamp for cable shield, size M40 2 Clamping the power cables
Grounding clamp for grounding conductor 2 Power cable grounding
"Product modified" label 1 Data about changes
Cable grommet, hole diameter 33.0 mm 1 Sealing for the cables
Cable grommet, hole diameter 40.3 mm 2 Sealing for the cables
IP54: Cable grommet, hole diameter 25.3 mm 3 Sealing for the cables
NOTE!
The Vacon
®
100 FLOW and HVAC software do not have the dynamic braking or the
brake resistor functions.
VACON · 20 RECEIVING THE DELIVERY
3
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
To Next Page
Loading...
