Vacon 100 - Page 70

* = As short as possible.
Table 22: The cable stripping lengths [in]. See the figure in step 1.
Frame A B C D E F G
MR4 0.6 1.4 0.4 0.8 0.3 1.4 *
MR5 0.8 1.6 0.4 1.2 0.4 1.6 *
MR6 0.8 3.6 0.6 2.4 0.6 2.4 *
MR7 0.8 3.1 0.8 3.1 0.8 3.1 *
* = As short as possible.
1 Strip the motor cable, the mains cable, and the
brake resistor cable.
NOTE!
The Vacon
®
100 FLOW and HVAC software
do not have the dynamic braking or the
brake resistor functions.
B
D
A
C
F
E
G
MAINS MOTOR
G. The grounding conductor
2 Open the cover of the AC drive.
M4x55
VACON · 70 POWER CABLING
5
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205