Vacon X5 - Page 112

X5 AC Drive User’s Manual Chapter 7: X5 Parameters
DPD00089A - 110 - © 2009 Vacon Incorporated All Rights Reserved
This parameter, 7th Fault, lists the fault that occurred 3 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1608 6th Fault
Read-Only
Range:n/a
Level: 2
This parameter, 6th Fault, lists the fault that occurred 4 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1635 5th Fault
Read-Only
Range: n/a
Level: 2
This parameter, 5th Fault, lists the fault that occurred 5 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1662 4th Fault
Read-Only
Range:n/a
Level: 2
This parameter, 4th Fault, lists the fault that occurred 6 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1689 3rd Fault
Read-Only
Range:n/a
Level: 2
This parameter, 3rd Fault, lists the fault that occurred 7 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1716 2nd Fault
Read-Only
Range: n/a
Level: 2
This parameter, 2nd Fault, lists the fault that occurred 8 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
1743 1st Fault
Read-Only
Range:n/a
Level: 2
This parameter, 1st Fault, lists the fault that occurred 9 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 125.
Table 7-2: Description of X5 Parameters (Page 40 of 40)