3.3 Installation with Rain Shield
The installation kit with rain shield (Vaisala order code: 215109) includes a metal mounting
plate and a rain shield for the transmitter.
Figure 4 Installation with Rain Shield
To install the transmitter with the rain shield:
1. Fasten the metal mounting plate to the wall or pole with screws. Note the arrow on the
mounting plate. Attach the mounting plate with the arrow pointing upwards.
2. Drill holes for the screws in the transmitter frame, and fasten the transmitter to the metal
mounting plate with four (M4) screws.
3. Fasten the rain shield to the metal mounting plate with two (M6) mounting screws.
Chapter 3 – Installation
15
To Next Page
Loading...
