Vaisala hmt120 - Table 31 FORM Command

Syntax Description
Examples:
>dsel
1. quantity : RH
2. quantity : T
>
>dsel rh t
1. quantity : RH
2. quantity : T
>
>dsel t
1. quantity : T
>
Table 31 FORM Command
Syntax Description
form <format><cr>
where format is a formatting string that
consists of one of the following fields:
“” String constant
x.y Value length modifier. x is numbers
before dot and y is numbers after
dot.
Ux Unit field length. U…U format is also
supported.
Q Quantity name (for example, rh, t, or
td)
#t or \t Tabulator
#r or \r Carriage return
#n or \n Line feed (new line)
After you have defined the quantities with the
calcs command, use the form command to set
the output format for the send and r commands.
• Quantity must be after x.y and
Ux modifiers.
• There must be a space between
parameters, #r#n or \r\n is not
supported.
• Max. string length is 80
characters.
• If the Ux parameter is not used,
unit is not displayed.
Chapter 4 – Serial Line Operation
43