Figure 9 Optional Probe Mounting Clamp
Attaching the probe mounting clamp to a conductive wall material
should be avoided, since the potential galvanic connection to the power
supplies and uncontrolled earth current loops could cause measurement errors
or even damage to the transmitter.
CAUTION!
3.7 Probe Mounting Flange
The probe mounting flange (Vaisala order code: 226061) is a general purpose mounting flange
for 12 mm diameter probes. It can be used to hold the HMP110 probe in a through-wall
installation.
The coaxial silicone plug that is delivered with the flange is not suitable for use
with the transmitter's probe cable.
Figure 10 Optional Probe Mounting Flange
HMT120 User Guide M211244EN-C
20
To Next Page
Loading...
