Vaisala hmt120 - Removing and Fastening Remote Humidity Probe; Figure 14 Removing the Humidity Probe (Remote Probe Model)

5.2 Removing and Fastening Remote Humidity
Probe
To remove or replace the probe:
1. Unscrew the small sleeve that secures the probe in place at the end of the probe cable
and pull out the probe.
2. Replace the probe and screw the small sleeve back on, securing the probe tightly in place.
1
2
3
Figure 14 Removing the Humidity Probe (Remote Probe Model)
1
Probe cable
2 Sleeve securing the probe to the cable
3 HMP110 probe
Chapter 5 – Maintenance
49