Vaisala hmt120 - Table 9 Cdate Command; Table 10 Ctext Command

Table 9 Cdate Command
Syntax Description
cdate<cr>
Show calibration date.
Calibration refers to the
calibration of the transmitter's
analog outputs.
cdate [yyyymmdd]<cr>
Set a new calibration date.
yyyy-mm-dd = Year (yyyy), month (mm) and
day (dd) of calibration
Example:
>cdate
Calibrated : "NOT SET"
>
Example (set a new calibration date to June 30, 2017):
cdate 2017-06-30
Calibrated : "2017-06-30"
Table 10 Ctext Command
Syntax Description
ctext<cr>
Show calibration information text.
Calibration refers to the
calibration of the transmitter's
analog outputs.
ctext [text]<cr>
Set a new calibration information text to be
shown after the automatic text "Calib.
info".
Example:
ctext
Calib. info: "VAISALA HELSINKI"
>
Chapter 4 – Serial Line Operation
29