LigaSure Vessel Sealing Generator Service Manual ix
Remove the Power Switch 8-22
Install a New Power Switch 8-24
RF Board and Heat Sink 8-25
Tools Needed 8-25
Remove the RF board 8-25
Remove the Heat Sink 8-28
Install the Heat Sink 8-28
Install the RF Board 8-29
Power Entry Module 8-30
Tools Needed 8-30
Remove the Power Entry Module 8-30
Install the Power Entry Module 8-31
Fuses 8-32
Tools Needed 8-32
Two Fuses in the Fuse Drawer 8-32
Three Fuses on the RF Board 8-33
One Fuse on the HV Power Supply Board 8-33
Chapter 9. Repair Policy
Responsibility of the Manufacturer 9-2
Returning the Generator for Service 9-2
Returning Circuit Boards 9-4
Service Centers 9-4
Chapter 10. Service Parts
Ordering Replacement Parts 10-2
Map of Major Components 10-2
List of Parts 10-3
Assembly, Box 10-3
Generator Assemblies 10-4
Front Panel Assembly 10-5
High Voltage Power Supply Board Assembly 10-6
RF Board Assembly 10-7
Control Board Assembly 10-8
Chapter 11. Warranty
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
