122
Model Code Page
22. Fuel system
1. 11. 1998
6200, 6900 223
14
Possible disturba nces
If the injection timing deviates much from the specified value,
check the following points:
1. Vibrating delivery pipe, hold to the pipe with one hand.
2. The distance between the magnetic sensor and the flyw-
heel is incorrect, repositio n the sensor.
3. Offset or Trig Level value incorrec t , reset the values.
4. Disturbing grooves on the flywheel.
5. The mutual position of the flywheel and the crankshaft
incorrect, remove the flywheel and fit it to the correct position
in relation to the crankshaft.
8366 62022 Electronic device for injection timing
To Next Page
Loading...
