669
Model Code Page
42. Gearbox
1. 4. 1997
420 3
6000--8750
1. 1. 1995
Special tools
Order no Description
ETV 890 220 Universal handle
ETV 891 870 Plate for fitting thrust bearing for differential side of gear (Gearbox 505---905)
ETV 892 230 Socket spanner for bevel pinion shaft ring nut (Gearbox 305---555)
ETV 894 190 Socket spanner for 4WD clutch drum nut
ETV 892 370 Sleeve for fitting input shaft front end bearing (Front axle 505---905)
Sleeve for fitting bevel pinion shaft front end bearing
ETV 892 380 Sleeve for fitting input shaft rear end bearing (Gearbox 505---905)
ETV 893 300 Puller for differential bearings (Gearbox 505---905)
ETV 893 340 Plate for fitting bearing race, pinion shaft rear bearing (Gearbox 505---905)
ETV 893 400 Plate for fitting differential bearings (Gearbox 505---905)
ETV 894 050 Drift for fitting locking pins for selector forks
ETV 894 080 Drift for fitting selector fork rail for LL---range
ETV 894 120 Counter hold for puller ETV 893300.
Locally prepared tools
ET 894 060 Press tool for adjusting selector forks
ETV 891870
ETV 892 230
ETV 892 370
ETV 890220
ETV 892380
ETV 894120
ETV 893302
ETV 893 300
ETV 893340
ETV 893400
ETV 894 190
To Next Page
Loading...
