349
Model Code Page
34. Autocontrol ---III
8. 11. 1990
6600E, 8100E 340 3
15. 6. 1992
AC---III controls also the following functions:
5. Cold starting
(Ignition switch has also a normal glowing position)
Notify readiness for start
Automatic afterglowing
if needed
6. Slip control
--- indicator lamp is lit=glowing
--- indicator lamp flashes=ready for starting
Programmed according to the engine coolant
temperature
--- indicator lamp is lit continuously=afterglowing
--- glowing time has been programmed according
to the engine coolant temperature
Slip control is switched on
with a switch that have 6
different positions
0=switched off
1 --- 5 = s w i t c h e d o n
Slip percent is
adjustable
Draft control se-
lector in posi-
tion P
Draft control se-
lector in posi-
t i o n 1 --- 5
--- b u z z e r s i g n a l i s
heard when the set slip
percent is exceeded.
--- if the set slip percent is ex-
ceeded, the lift order is sent to
the power lift
--- lift movement greatness is
determined by the position of
the slip switch
1 --- s m a l l l i f t
5 --- b i g l i f t
--- desired slip limit percent can be
programmed
To Next Page
Loading...
