569
Model
No Page
112.08.1998 6000---8750 39.18
FIELDMASTER, fitting instruction
(10)
Fieldmaster 33378000
FieldMaster is a combined performance monitor which
can monitor both tractor and implement functions.
FieldMaster monitors the following tractor functi-
ons:
--- driving speed, km/h,
--- wheel slip (radar is required))
--- PTO shaft rotating speed, rpm
--- distance travelled, km
--- a r e a , h a
--- time functions (clock, elapsed time, remaining time
aso).
FieldMaster can monitor the following implement
functions:
--- sprayers (l/hour, l/ha, litres, alarm functions, automatic
proportioning aso)
--- fertilizers (kg, kg/ha, kg/hour, rpm, alarm functions aso)
--- drills (kg/ha, seed amount in kilos, driving paths aso)
--- balers (pcs, kg, rpm, alarm functions aso)
--- slurry spreaders (ton/ha, tons, rpm aso)
--- other implements (e.g. cultivated area)
Options:
--- radar (slip, ground speed etc.)
--- writer (output of work etc.). The writer is connected with
a cable to the display unit.
--- readiness for the global location system with an aid of a
satellite (GPS)
The follow---up of different functions on an implement
requires, that the implement has sensorswhich have been
connected to the FM via a socket in the rear of the tractor.
On an implement there can be e.g. rpm sensors, position
sensors, wheel sensors, flow meters, weight cells,
manometers, actuators/position potentiometers, level
sensors etc.
FITTING (sensor):
--- Disconnect the battery earth cable.
To Next Page
Loading...
