Floor hatch
770
Model Code Page
441. Quick ---shift gear
6100--8400 441 10
8. 11. 1990
E. Changing quick---shift gear sole-
noid valve
1. Remove the floor mat and the cover plates on the floor
opening.
2. Detach the connector from the solenoid valve.
3. Unscrew the solenoid fixing screws and fit a new solenoid.
Note! Do not tighten the solenoid screws too hard. Correct
torque is 2, 5 ---3,5 Nm.
4. Connect the connector to the solenoid. Check the function
of the quick---shift gear solenoid.
5. Fit the floor hatch and the floor mat.
To Next Page
Loading...
