5 Display and Configuration Interface
Varec, Inc. 93
Display Only Description
Current Primary measurement variable current (in mA) value
from the HART device.
PV Value Primary measurement variable value from the HART
device.
SV Units The secondary value units.
SV Value Secondary measurement variable value from the HART
device.
Percent Range The primary measurement variable value as a
percentage of range read from the HART device.
Univ Cmd Rev The revision of the universal command set the HART
device supports.
Dev Cmd Rev The revision of the device commands that the HART
device supports.
Softw. Version The software version of the HART device.
Hardw. Version The hardware version of the HART device.
Cmd Status The status of command, as follows:
•Start
•Complete
•Error
Cmd Error The number of errors if Command fails.
Comm Tries The number of times the 2920 has polled the HART
Device.
Comm Failures The number of time the communications from the 2920
to the HART Device has failed.
Pnt Status Byte value indicating status of point. Values are:
0: No error
Elapse Time of last update.
Pnt CheckSum CRC-16 Checksum of point's static configuration
parameters.
Command
PV Units Primary Value measurement units.
To Next Page
Loading...