2920 Float & Tape Transmitter 13 Specifications
144 Installation and Operations Manual
Warning! Do not substitute electrical components. Substitution may impair intrinsic
safety and cause a hazardous condition.
Note Refer to Control Drawing 28-013355, Appendix D.
Explosion-proof/Flameproof (Ex d) HART
Interface (Non-I.S.)
Ex d HART HART Master for measuring device
Source Voltage U = 24 V (Typical)
Total Imax Startup currents not to exceed 27 mA max
Connectable Sensors Typically 4 max, depending on current
consumption (including startup current)
To Next Page
Loading...