SAFE OPERATING INSTRUCTION
Reverse
Most 2-wheeled vehicles do not provide a reverse option, making the Volcon
Grunt EVO unique. To help prevent anxiety, panic or an accident we
recommend the following:
- Check your surroundings before using the reverse option. Ensure
there are no potential obstructions, bystanders or obstacles in your
intended path.
- Keep your speed low and do not back up for long distances.
- Do not back up in tight spaces or close objects/obstructions.
- Apply minimal throttle when first engaging reverse, this will minimize
sudden movement or jerk.
NOTE: Removing pressure from the down arrow on the D-Pad, even with
throttle engaged, will automatically put the vehicle back in Neutral. You will
need to engage reverse,again, in order to continue with your reverse path.
Emergency Mode (E-Mode) Button
The Volcon Grunt EVO provides a manual safety option to help cycle through
drive modes in the event of component damage or signal failure.
This safety feature should only be used in the following events:
- D-Pad or Vehicle Control Unit (VCU) has been damaged.
- D-Pad will not respond to touch or selection.
- The vehicle has dropped into Neutral while riding.
- The vehicle will not move away from Neutral with use of the D-Pad.
Safety Tether
The Volcon Grunt EVO is equipped with a safety tether. The device acts as a
“kill switch” when connection is lost. The power signal ONLY to the throttle is
disrupted. The EVO remains powered, however the throttle will not engage
until the tether is reconnected.
960-101086 Rev B Page 26 of 69
To Next Page
Loading...