VOLTCRAFT FG-1602 - Display:saver:delay; Display:saver:immediate (no Query Form)

7
DISPlay:SAVer:DELay
This command sets or queries delay time for the screen saver function. The setting range
is 1 minute to 999 minutes.
Syntax
DISPlay:SAVer:DELay {<minutes>|MINimum|MAXimum}
DISPlay:SAVer:DELay? {MINimum|MAXimum}
Arguments
<minutes>::=<NR1>[<units>]
where:
<NR1> is the delay time in minutes.
<units>::=MIN
Returns
<minutes>
Examples
DISPlay:SAVer:DELay 30
sets the delay time for the screen saver function to 30 minutes.
DISPlay:SAVer:IMMediate (No Query Form)
This command sets the screen saver state to ON, regardless of the
DISPlay:SAVer[:STATe] command setting.
The screen saver is enabled immediately (without waiting for the delay time).
Syntax
DISPlay:SAVer:IMMediate
Arguments
None
Examples
DISPLAY:SAVER:IMMEDIATE
sets the screen saver state to ON.