VOLTCRAFT FG-1602 - [Source[1|2]]:Mod:state

32
The setting range is 0.0% to 100.0%.
Syntax
[SOURce[1|2]]:FUNCtion:RAMP:SYMMetry {<symmetry>|MINimum|MAXimum}
[SOURce[1|2]]:FUNCtion:RAMP:SYMMetry?
Arguments
<symmetry>::=<NR2>[<units>]
where:
<NR2> is the symmetry.
<units>::=PCT
Returns
<symmetry>
Examples
SOURce1:FUNCtion:RAMP:SYMMetry 80.5
sets the symmetry of the CH1 ramp waveform to 80.5%.
[SOURce[1|2]]:MOD:STATe
This command enables or disables the modulation function for the specified channel. The
query returns the state of modulation function.
Syntax
[SOURce[1|2]]:MOD:STATe {ON|OFF|<NR1>}
[SOURce[1|2]]:MOD:STATe?
Arguments
ON or <NR1>≠0 enables the modulation function.
OFF or <NR1>=0 disables the modulation function.
Returns
<NR1>
Examples
SOURce1:MOD:STATe ON
enables the modulation function for the CH1.