VOLTCRAFT FG-1602 - [Source[1|2]]:Pskey:internal:rate; [Source[1|2]]:Pskey:source

38
DEG: 0 to +180, in 1 degree steps, relative to phase value
Returns
<deviation>
Examples
SOURce1:PSKey:DEViation MAXimum
sets the maximum value for the CH1 phase deviation of PSK modulation.
[SOURce[1|2]]:PSKey:INTernal:RATE
This command sets or queries the internal modulation rate of PSK modulation for the
specified channel. Use this command when the internal modulation source is selected.
Syntax
[SOURce[1|2]]:PSKey:INTernal:RATE {<rate>|MINimum|MAXimum}
[SOURce[1|2]]:PSKey:INTernal:RATE? {MINimum|MAXimum}
Arguments
<rate>::=<NRf>[<units>]
where:
<NRf> is the modulation rate.
<units>::=[Hz|kHz|MHz]
Returns
<rate>
Examples
SOURce1:PSKey:INTernal:RATE 50Hz
sets the CH1 internal modulation rate to 50 Hz.
[SOURce[1|2]]:PSKey:SOURce
This command sets or queries the source of modulation signal of PSK modulation for the
specified channel.
Syntax
[SOURce[1|2]]:PSKey:SOURce [INTernal|EXTernal]
[SOURce[1|2]]:PSKey:SOURce?