VOLTCRAFT FG-1602 - Commands; Counter:couping; Counter:dutycycle? (Query Only)

To Next Page

To Previous Page

2. Commands

COUNter:COUPing

This command sets or queries the coupling mode of the counter to AC or DC.

Syntax

COUNter:COUPing [AC|DC]

COUNter:COUPing?

Arguments

AC means that AC is selected for the coupling mode of the counter.

DC means that DC is selected for the coupling mode of the counter.

Returns

AC|DC

Example

COUNter:COUPing DC

sets the coupling mode of the counter to DC.

COUNter:DUTYcycle? (Query Only)

This query-only command returns the measurement results for duty cycle of the counter.

Syntax

COUNter:DUTYcycle?

Arguments

None

Returns

Examples

:COUNter:DUTYcycle?

Main Page

Table of Contents2
Introduction to the SCPI Language5
1.1. Command Syntax5
1.2. Symbol Description5
1.3. Programmed Parameter Type5
1.4. Command Abbreviation6
Commands7
Counter:couping7
Counter:dutycycle? (Query Only)7
Counter:freq? (Query Only)8
Counter:hfr8
Counter:period? (Query Only)9
Counter:pulsewidth? (Query Only)9
Counter:sensitivity9
Display:brightness10
Display:saver:delay11
Display:saver:immediate (no Query Form)11
Display:saver[:State]12
Hcopy:sdump:data? (Query Only)12
Hcopy:sdump[:Immediate] (no Query Form)13
IDN? (Query Only)13
Output[1|2]:Impedance14
Output[1|2][:State]14
RST (no Query Form)15
[Source[1|2]]:Am[:Depth]15
[Source[1|2]]:Am:internal:frequency16
[Source[1|2]]:Am:source16
[Source[1|2]]:Am:state17
[Source[1|2]]:Askey[:Amplitude]17
[Source[1|2]]:Askey:internal:rate18
[Source[1|2]]:Askey:source18
[Source[1|2]]:Askey:state19
[Source[1|2]]:Bpskey:data19
[Source[1|2]]:Bpskey:internal:rate20
[Source[1|2]]:Bpskey:phase21
[Source[1|2]]:Bpskey:state21
[Source[1|2]]:Burst:gate:polarity22
[Source[1|2]]:Burst:internal:period22
[Source[1|2]]:Burst:mode23
[Source[1|2]]:Burst:ncycles23
[Source[1|2]]:Burst:source24
[Source[1|2]]:Burst:state24
[Source[1|2]]:Fm[:Deviation]25
[Source[1|2]]:Fm:internal:frequency25
[Source[1|2]]:Fm:source26
[Source[1|2]]:Fm:state27
[Source[1|2]]:Frequency:center27
[Source[1|2]]:Frequency[:Fixed]28
[Source[1|2]]:Frequency:span28
[Source[1|2]]:Frequency:start29
[Source[1|2]]:Frequency:stop29
[Source[1|2]]:Fskey[:Frequency]30
[Source[1|2]]:Fskey:internal:rate31
[Source[1|2]]:Fskey:source31
[Source[1|2]]:Fskey:state32
[Source[1|2]]:3Fskey[:Frequency]32
[Source[1|2]]:3Fskey:internal:rate33
[Source[1|2]]:3Fskey:state33
[Source[1|2]]:4Fskey[:Frequency]34
[Source[1|2]]:4Fskey:internal:rate34
[Source[1|2]]:4Fskey:state35
[Source[1|2]]:Function:ramp:symmetry35
[Source[1|2]]:Mod:state36
[Source[1|2]]:Oskey:internal:rate37
[Source[1|2]]:Oskey:state37
[Source[1|2]]:Oskey:time38
[Source[1|2]]:Phase[:Adjust]38
[Source[1|2]]:Pm[:Deviation]39
[Source[1|2]]:Pm:internal:frequency40
[Source[1|2]]:Pm:source40
[Source[1|2]]:Pm:state41
[Source[1|2]]:Pskey[:Deviation]41
[Source[1|2]]:Pskey:internal:rate42
[Source[1|2]]:Pskey:source42
[Source[1|2]]:Pskey:state43
[Source[1|2]]:Pulse:dcycle43
[Source[1|2]]:Pulse:transition[:Leading]44
[Source[1|2]]:Pulse:transition:trailing45
[Source[1|2]]:Pulse:width45
[Source[1|2]]:Pwm:internal:frequency46
[Source[1|2]]:Pwm:source46
[Source[1|2]]:Pwm:state47
[Source[1|2]]:Pwm[:Deviation]:Dcycle47
[Source[1|2]]:Sweep:source48
[Source[1|2]]:Sweep:spacing48
[Source[1|2]]:Sweep:state49
[Source[1|2]]:Sweep:time49
[Source[1|2]]:Voltage[:Level][:Immediate]:Offset50
[Source[1|2]]:Voltage[:Level][:Immediate][:Amplitude]50
System:beeper[:Immediate] (no Query Form)51
System:beeper:state51
System:error[:Next]? (Query Only)52
System:language52
System:version? (Query Only)53
Trace|Data[:Data]54
Command Errors54
Index56

VOLTCRAFT FG-1602 - Commands; Counter:couping; Counter:dutycycle? (Query Only)

Table of Contents

Related product manuals