VOLTCRAFT FG-1602 - [Source[1|2]]:4 Fskey:state; [Source[1|2]]:Function:ramp:symmetry

31
Syntax
[SOURce[1|2]]:4FSKey:INTernal:RATE {<rate>|MINimum|MAXimum}
[SOURce[1|2]]:4FSKey:INTernal:RATE? {MINimum|MAXimum}
Arguments
<rate>::=<NRf>[<units>]
where:
<NRf> is the modulation rate.
<units>::=[Hz|kHz|MHz]
Returns
<rate>
Examples
SOURce1:4FSKey:INTernal:RATE 50Hz
sets the CH1 internal 4FSK modulation rate to 50 Hz.
[SOURce[1|2]]:4FSKey:STATe
This command enables or disables 4FSK modulation. The query returns the state of 4FSK
modulation. Select a sine, square, ramp, or arbitrary waveform as the carrier waveform.
Syntax
[SOURce[1|2]]:4FSKey:STATe {ON|OFF|<NR1>}
[SOURce[1|2]]:4FSKey:STATe?
Arguments
ON or <NR1>≠0 enables 4FSK modulation.
OFF or <NR1>=0 disables 4FSK modulation.
Returns
<NR1>
Examples
SOURce1:4FSKey:STATe ON
enables the CH1 4FSK modulation.
[SOURce[1|2]]:FUNCtion:RAMP:SYMMetry
This command sets or queries the symmetry of ramp waveform for the specified channel.