VOLTCRAFT FG-1602 - [Source[1|2]]:Pulse:transition:trailing; [Source[1|2]]:Pulse:width

41
[SOURce[1|2]]:PULSe:TRANsition:TRAiling
This command sets or queries the trailing edge time of pulse waveform.
Syntax
[SOURce[1|2]]:PULSe:TRANsition:TRAiling {<seconds>|MINimum|MAXimum}
[SOURce[1|2]]:PULSe:TRANsition:TRAiling?[MINimum|MAXimum]
Arguments
<seconds>::=<NRf>[<units>]
where
<NRf> is the trailing edge of pulse waveform.
<units>::=[ns|us|ms|s]
Returns
<seconds>
Examples
SOURce1:PULSe:TRANsition:TRAiling 200ns
sets the trailing edge time to 200 ns.
[SOURce[1|2]]:PULSe:WIDTh
This command sets or queries the pulse width for the specified channel.
Syntax
[SOURce[1|2]]:PULSe:WIDTh {<seconds>|MINimum|MAXimum}
[SOURce[1|2]]:PULSe:WIDTh?[MINimum|MAXimum]
Arguments
<seconds>::=<NRf>[<units>]
where
<NRf> is the pulse width.
<units>::=[ns|us|ms|s]
Returns
<seconds>
Examples
SOURce1:PULSe:WIDTh 200ns
sets the CH 1 pulse width to 200 ns.