VOLTCRAFT FG-1602 - [Source[1|2]]:Burst:source; [Source[1|2]]:Burst:state

20
<NRf> is the burst count. The burst count ranges from 1 to 500,000.
INFinity sets the burst count to infinite count.
MINimum sets the burst count to minimum count.
MAXimum sets the burst count to maximum count.
Returns
<cycles>
Examples
SOURce1:BURSt:NCYCles 2
sets the CH1 burst count to 2.
[SOURce[1|2]]:BURSt:SOURce
This command sets or queries the trigger source in the burst mode for the specified
channel. This command is available only in the Triggered burst mode.
Syntax
[SOURce[1|2]]:BURSt:SOURce [TIMer|MANual|EXTernal]
[SOURce[1|2]]:BURSt:SOURce?
Arguments
TIMer specifies an internal clock as the trigger source.
MANual specifies a manual trigger input as the trigger source.
EXTernal specifies an external trigger input as the trigger source.
Returns
TIM|MAN|EXT
Examples
SOURce1:BURSt:SOURce EXTernal
sets an external trigger input as the trigger source in the burst mode.
[SOURce[1|2]]:BURSt:STATe
This command enables or disables the burst mode for the specified channel. The query
returns the state of burst mode.
Syntax
[SOURce[1|2]]:BURSt:STATe {ON|OFF|<NR1>}