VOLTCRAFT FG-1602 - [Source[1|2]]:Fskey[:Frequency]

26
Syntax
[SOURce[1|2]]:FREQuency:STOP {<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:FREQuency:STOP? {MINimum|MAXimum}
Arguments
<frequency>::=<NRf>[<units>]
where:
<NRf> is the stop frequency.
<units>::=[Hz|kHz|MHz]
Returns
<frequency>
Examples
SOURce1:FREQuency:STOP 100KHz
sets the stop frequency of CH1 to 100 kHz.
[SOURce[1|2]]:FSKey[:FREQuency]
This command sets or queries the hop frequency of FSK modulation for the specified
channel.
Syntax
[SOURce[1|2]]:FSKey[:FREQuency] {<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:FSKey[:FREQuency]? {MINimum|MAXimum}
Arguments
<frequency>::=<NRf>[<units>]
where:
<NRf> is the hop frequency.
<units>::=[Hz|kHz|MHz]
Returns
<frequency>
Examples
SOURce1:FSKey:FREQuency 1.0MHz
sets the hop frequency of CH1 FSK modulation to 1.0 MHz.