VOLTCRAFT FG-1602 - [Source[1|2]]:4 Fskey[:Frequency]; [Source[1|2]]:4 Fskey:internal:rate

30
OFF or <NR1>=0 disables 3FSK modulation.
Returns
<NR1>
Examples
SOURce1:3FSKey:STATe ON
enables the CH1 3FSK modulation.
[SOURce[1|2]]:4FSKey[:FREQuency]
This command sets or queries the hop frequency of 4FSK modulation for the specified
channel.
Syntax
[SOURce[1|2]]:4FSKey[:FREQuency] <n>,{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:4FSKey[:FREQuency]? <n>,{MINimum|MAXimum}
Arguments
<n>::=<NR1>
where:
<NR1> is the sequence number of hop frequency, which can be 1, 2, or 3.
<frequency>::=<NRf>[<units>]
where:
<NRf> is the hop frequency.
<units>::=[Hz|kHz|MHz]
Returns
<frequency>
Examples
SOURce1:4FSKey:FREQuency 2,1.0MHz
sets the hop frequency 2 of CH1 4FSK modulation to 1.0 MHz.
[SOURce[1|2]]:4FSKey:INTernal:RATE
This command sets or queries the internal modulation rate of 4FSK modulation for the
specified channel.