OM ET18/20/24 us 1.3 * et18_20_24b510.fm 5-41
5
Setting down
Crushing hazard due to uncontrolled movements of the
attachment!
Can result in severe injury or death.
► Ensure that no one is in the danger zone.
► Lower the attachment to level and firm ground ensuring
stability.
Re-equipping the attachments is described below for a bucket. If you are
fitting or removing attachments with their own hydraulic functions – offset
bucket, for example – you must follow the special information given in the
Operator’s Manual of the attachment.
Also refer to the Operator’s Manual for the procedure to follow for fitting an
attachment onto an Easy Lock quickhitch.
The hydraulic system of the machine is still pressurized even
when the engine is not running. Due to the residual pressure,
the hydraulic quick couplers can be removed but not installed
back on again.
► Release the pressure in the work hydraulics.
To Next Page
Loading...
