Wacker Neuson ET18 - Releasing the Door Arrester; Opening the Door to a Gap

OM ET18/20/24 us 1.3 * et18_20_24i400.fm 4-3
4
Releasing the door arrester
Pull button A to release the door out of the arrester.
Opening the door to a gap
Notice
The door can be damaged.
► Bear in mind the larger width of the machine if the door is
opened to a gap.
► Close the doors when traveling through passages.
1. Raise door opener A.
2. Open the door until it engages in door lock B.
3. Let door opener A engage in door lock B.
Unlocking (from inside):
Press lever C inside on the door lock downward.
Unlocking (from outside):
Press the handle.
Fig. 56: Releasing the door arrester
A
Fig. 57: Opening the door to a gap
A
B
C