OM ET18/20/24 us 1.3 * et18_20_24i400.fm 4-13
4
Seat belt adjustment
Personal injury hazard! Do not travel or operate with the
seat belt unbuckled.
Causes severe injury or death.
► Fasten and adjust your seat belt before starting machine
travel or operating the machine.
► Do not twist the seat belt when you fasten it.
► Firmly fasten your seat belt over your hips and not over your
stomach.
► Do not place the seat belt over hard, edged or fragile items
(tools, for example).
► Seat belt buckle must not be obstructed by foreign bodies
(paper or similar); otherwise the buckle latch cannot lock into
place.
► The seat belt must be replaced by a Wacker Neuson service
center after an accident, and the bearing capacity of the
fastening points and seat fixtures must be checked.
► Check the seat belts at regular intervals. Have damaged parts
immediately replaced by a Wacker Neuson service center.
Fastening the seat belt
1. Insert buckle latch A into seat belt buckle B with an audible click.
2. Tighten seat belt C by pulling at its end.
Unfastening the seat belt
1. Press the red pushbutton switch D on seat belt buckle B until the
buckle latch comes out.
2. Place seat belt C aside.
Fig. 81: Fastening the seat belt
A
B
C
Fig. 82: Unfastening the seat belt
C
B
D
To Next Page
Loading...
