OM ET18/20/24 us 1.3 * et18_20_24e300.fm 3-21
3
Meaning (ET 24)
This label describes the functions of the pedals and control levers
(Operating Pattern A – ISO controls (Europe) and Operating Pattern A).
Check before starting the machine the operating pattern that has been
chosen.
– see “ISO/SAE changeover” on page 3-19
Position
On the roof window on right-hand side in traveling direction.
Fig. 45: Function ET 24 standard
Fig. 46: Function ET 24 auxiliary hydraulics/
proportional controls
Fig. 47: Function ET 24 Powertilt/3rd control
circuit
To Next Page
Loading...
