OM ET18/20/24 us 1.3 * et18_20_24i400.fm 4-19
4
Fire extinguisher
A fire extinguisher is not available, neither as standard nor optional
equipment.
A fire extinguisher according to DIN-EN 3 must be installed by a Wacker
Neuson service center.
A bracket for the fire extinguisher must be fastened on the left-hand C
pillar for the cab or canopy.
Ensure the firm and safe mounting of the fire extinguisher.
Check the fire extinguisher at regular intervals, also ensure that
it is safely installed. Observe the manufacturer’s indications.
Armrest
1. Hold the armrest, and loosen and pull out button A.
2. Move the armrest to the required position.
3. Let button A lock into place and tighten it.
Fig. 88: Fire extinguisher on C pillar
To Next Page
Loading...
