BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_03.fm 4-47
Putting into operation 4
Information on the checklists
These checklists are not intended to be exhaustive. They are only
intended to help you to fulfill your obligation to exercise due care.
The checking and monitoring work listed below is described in greater
detail in the following chapters of the Operator’s Manual.
If questions are answered with NO, first rectify the cause of the
malfunction before starting or continuing work.
"Preparing Machine for Operation" checklist
Designation X
1 Batteries sufficiently loaded?
2 Oil level in hydraulic reservoir OK?
3 Water level in washer reservoir OK?
4 Loader unit lubricated?
5 Brake system (including Parking brake) OK?
6 Brake fluid level (ATF) OK?
7 Tire condition and inflation pressure OK?
8 Wheel nuts safely tightened
(especially after a wheel change)?
9 Pedal area clean?
10 Lights, signals, indicators, warning lights and
indicator lights OK?
11 Windows, mirrors, lights and steps clean?
12 Attachment on the loader unit safely locked?
13 Battery cover plate securely locked?
14 Especially after cleaning, maintenance or repair work:
Rags, tools and other loose objects removed?
15 Approved warning triangle, hazard warning light and
first aid kit in the machine?
To Next Page
Loading...
Need help?
General
