5-102 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
5.13 Options
Hose burst valve (partly opt)
Important safety instructions
The hose burst valve prevents the loader unit from being lowered or tilted
out without being braked, in the event of a bursting hose or pipe!
The lift or tilt rams are locked and can no longer be operated.
Accident hazard when lowering the loader unit in an emergency!
Can cause serious injury or death!
► Secure the danger zone.
► Do not try to repair the machine under a raised load.
► Perform emergency lowering with extreme care.
Proceed as follows in case of a bursting hose or pipe:
1. Stop the machine immediately.
2. Apply the parking brake.
3. Secure the danger zone.
4. Disable the road-travel lock for the joystick if it is enabled
– see chapter 4 “Locking/unlocking the control lever (joystick)” on
page 4-51.
5. Push joystick slowly forward C until the loading unit is lowered
completely.
6. Return the joystick to neutral.
7. Turn the machine off and remove the ignition key.
8. Have immediately repaired by an authorized service center in case of
damage to the hydraulic system or hose burst valve A.
Collect the hydraulic oil as it drains with a suitable container (if this can
be done without any danger) and dispose of it in an environmentally
friendly manner.
To Next Page
Loading...
Need help?
General
