BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_03.fm 4-33
Putting into operation 4
4.3 Overview indicator and warning lights
The indicator lights provide information to the operator.
The warning lights warn the operator of damage to the machine.
► If a warning light illuminates during operation, stop the machine
immediately and get in touch with an authorized service center.
Indicator and warning lights
When ignition is switched on, all warning and indicator lights on the gauge
illuminate briefly for a check and then go out after a few seconds.
• Indicator light 41stays on.
For your own safety and in order to avoid consequential damage to the
individual components of the machine, have malfunctioning indicator and
warning lights immediately checked or replaced by an authorized service
center!
Putting into operation
To Next Page
Loading...
Need help?
General
