BA 357-00 * 3.0 * 35700_08_Betriebsstörung.fm 8-1
Malfunctions 8
8 Malfunctions
The information given in this chapter is provided for the fast and reliable
detection of malfunctions.
Please contact an authorized service center if
the malfunction cannot be remedied.
Repairs may only be carried out by an authorized service center and only
by trained personnel.
8.1 Malfunctions of the travel drive
See next page for additional malfunctions on the travel drive.
Errors/malfunctions Possible causes Remedy/avoidance See
Machine cannot be turned on
Battery connector disconnected Connect the battery connector. 4-20
Malfunctioning or empty battery
Charge battery or replace it with a
new one.
7-31
Malfunctioning fuse
Check the fuses.
Contact an authorized service
center if necessary.
9-11
Loose or oxidized cable
connections in starter circuit
Contact an authorized service
center.
–
Machine can be turned on but
does not start driving
Parking brake is applied Release the parking brake. 5-6
Operator presence switch
not actuated
Sit down on the operator seat. 4-7
Motor isolating switch actuated Loosen motor isolating switch. 4-22
Accelerator pedal not actuated Press accelerator pedal downward. –
Forward-reverse control
in position "neutral"
Select a travel direction. 5-13
Error(s) detected in the system
Turn off the machine and turn it on
again, select the travel direction
again.
If the error occurs again, find an
authorized service center.
–
Malfunctions
To Next Page
Loading...
Need help?
General
