BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-13
Operation 5
Selecting a travel direction and starting machine travel
Risk of injury to persons in the danger zone of the machine!
Persons in the danger zone can be overlooked and seriously injured or
killed during backward machine travel.
► Adjust and use the existing visual aids
(rearview mirrors, for example) correctly.
► Work particularly carefully when reversing the machine.
► Interrupt work immediately if persons enter the danger zone.
If the machine is equipped with a reverse warning system (opt), a warning
signal will sound after selecting "Reverse" travel direction. This tone warns
persons near the machine during reverse travel.
The travel drive must be in neutral position before the machine can be put
into operation.
1. Release the parking brake.
➥ Indicator light 41 on the indicating instrument extinguishes.
2. Select the travel direction with switch 55 on joystick.
- V = forward – arrow A and indicator display B/1 illuminate in the
digital display of the gauge.
- R = reverse – arrow B and indicator display B/2 illuminate in the
digital display of the gauge.
3. Press the accelerator pedal slowly.
➥ Machine travel starts.
4. Test the brakes at low speed.
If the selection of the travel direction is not accepted (no function), this
means that push button 56 (travel drive – neutral position) has been
pressed unintentionally!
► Select the travel direction again.
To Next Page
Loading...
Need help?
General
