7-72 BA 357-00 * 3.0 * 35700_07_Wartung.fm
7 Maintenance
7.12 Window washer system (only in the cabin cpl.)
Washer system reservoir
Filler inlet 34 of the reservoir is located on the left in the cabin.
The level in the reservoir is visible in inspection window A.
Add only clean tap water!
Add a suitable cleaning agent if required.
At temperatures around or below the freezing point: add antifreeze for
washer systems to the water.
► Refer to the antifreeze instructions for further information on
concentrations.
Maintenance intervals – see "Maintenance plan" on page 7-6.
Specifications and fill quantities
– see chapter 7 “Fluids and lubricants” on page 7-14.
To Next Page
Loading...