7-84 BA 357-00 * 3.0 * 35700_07_Wartung.fm
7 Maintenance
7.18 Machine preservation
Anti-corrosion protection (opt)
Corrosion on electric connections or components can cause hazardous
operating malfunctions.
► Check the machine regularly for corrosion.
► If you replace elements, check whether they are classified as in the
table "Components coated with anti-corrosive wax on page 7-85" and
whether they are subject to special treatment before assembly.
► Have the sealing checked and repaired at least once a year by ELASKON
– see the Elaskon servicing pass supplied with the machine.
The machine can be specially protected ex works against corrosion
for work with "aggressive media" (for example in a saline environment).
However, this anti-corrosion protection is affected by external factors,
for example dirt, cleaning, etc. This is why it only has ongoing effect if
checked at regular intervals and renewed or reapplied as required.
If no anti-corrosion protection is applied to the machine, for example for
work in a saline environment, we recommend retrofitting your machine
with this option by a sales partner.
The following anti-corrosion protection is used at the factory and is also
recommended for later use:
Designation:
Elaskon 2000 ML, Elaskon UBS light
Elaskon Aero 46 spezial, Elaskon Multi 80
Manufacturer: ELASKON Sachsen GmbH & Co. KG, Dresden (Germany)
To Next Page
Loading...