EasyManuals Logo

Wacker Neuson KRAMER 5055e User Manual

Wacker Neuson KRAMER 5055e
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #253 background imageLoading...
Page #253 background image
BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-1
Maintenance 7
7 Maintenance
7.1 Information on maintenance
Responsibilities and prerequisites
Operational readiness and the service life of the machine are heavily
dependent on maintenance.
The "daily maintenance" and "work every 20 hours of operation"
indicated in the maintenance schedule have to
be performed by a specially trained operator.
All other work listed in the maintenance plan (delivery inspection
and inspections A, B and C) may only be carried out by an
authorized service center in order to be recognized
for warranty claims.
The respective intervals for the inspection can be found in the
service manual.
The maintenance and service personnel must have specialized
knowledge about the maintenance and inspection work on the
machine. The necessary expertise can be obtained at training
sessions from KRAMER WERKE Service.
The parts numbers of the plant materials and consumables required for
the maintenance work as well as the numbers of the maintenance sets
"A," "B," or "C" can be found in the spare parts list.
The manufacturer shall not be liable for damage or personal injury
caused by failure to observe instructions!
Please contact your dealer if you require more
information on maintenance.
Insist on using original spare parts for repairs.
The machine’s permits, certifications, registrations, etc., may be
withdrawn if machine parts/components with a prescribed condition or
quality, or machine parts/components that can put persons at risk
during operation, are subsequently modified or exchanged!
Basic safety instructions and all informational and warning labels
attached to the machine must be observed.
Appropriate protective clothing must be worn
when performing maintenance work.
Only use functional and suitable tools.
Only perform maintenance work if the machine has been secured
see chapter 5 “Machine stopping/securing” on page 5-18.
If working under the raised loader unit is unavoidable, then the loader
unit must be secured by a suitable support.
Maintenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson KRAMER 5055e and is the answer not in the manual?

Wacker Neuson KRAMER 5055e Specifications

General IconGeneral
BrandWacker Neuson
ModelKRAMER 5055e
CategoryFront End Loaders
LanguageEnglish

Related product manuals