4-44 BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_03.fm
4 Putting into operation
.
4.4 Preparatory work
Important information before putting the machine into operation
Risk of injury when working with the machine!
Can cause injury or death.
► Ensure that nobody is in the danger zone.
► Operate the machine only from the operator seat.
► Read and understand the Operator’s Manual before putting the
machine into operation.
► Pay attention to all safety instructions.
Falling hazard when entering or exiting!
Entering or exiting incorrectly can cause injury.
► Keep the mandatory climbing aids clean.
► Use the mandatory climbing aids for entering and exiting the machine.
► Face the vehicle as you enter and leave it.
► Have damaged climbing aids replaced.
As soon as the ignition key is in position II, the machine consumes power
and the operating hours are counted regardless of whether work is
performed or not with the machine.
► Always turn the ignition key to position " 0 " when no work is performed
with the machine.
To Next Page
Loading...
Need help?
General
