BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-67
Operation 5
5.11 Work operation
Important safety instructions for work operations
The machine risks tipping over if sinks or falls into a pit!
Can cause serious injury or death.
► Never drive up to the edge of a pit from outside.
► Never undermine the foundations of walls.
Risk of death due to electric high-voltage cables, underground
cables, gas and water pipes!
Can cause serious injury or death.
► Keep a safe distance from supply lines.
► Contact the energy supplier before starting work and clarify details.
Crushing hazard due to tipping over of vehicle!
A tipping vehicle can cause serious injury or death. There is a tipping
hazard, in particular in curves.
► Lower the loader unit to transport position before starting machine
travel.
► Adapt the travel speed to the prevailing conditions.
► Adapt the driving speed to the material loaded.
► Pay attention to persons and obstacles.
► Reduce speed before downhill travel.
► Ensure good visibility of the material you want to pick up and of the
work and travel range.
► Do not perform any U-turns on steep slopes.
► Whenever possible, perform machine travel in reverse when
transporting material on a steep slope.
► Always fasten your seat belt.
► Do not hold body parts outside of the machine.
► Carefully steer the machine if the loader unit is raised.
► Do not exceed the permissible payloads -- see load diagram.
To Next Page
Loading...
Need help?
General
