BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm 4-1
Putting into operation 4
4 Putting into operation
4.1 Cabin/control stand
Important information on the cabin
• An open cab (canopy) is standard in the series-produced machine.
A closed cab (cabin cpl.) is available as an option.
• The machine should only be operated if all windows in the cabin are
free of dirt, snow and ice.
• The cabin of the machine does not protect against harmful substances
according to the standard EN 15695-1:2009. Therefore,
the machine can therefore not be used for spraying agents.
• The standard production series cabin does not offer sufficient
protection against falling trees or branches or against penetrating
objects. Therefore, the machine is not approved for forestry
applications.
• An operator's cabin damaged in an accident (deformation) may not be
repaired. It must be replaced by an authorized service center.
• Perforating, welding or separating elements from the cabin is
prohibited, since this sort of work modifies the cabin and the cabin then
no longer conforms with the certification
(loss of possible warranty claims).
The machine is equipped with an operator presence switch to protect the
operator. In this case:
• The machine can only be switched on if the operator has taken his
place in the operator seat.
• If the operator seat is relinquished for more than 3 seconds during
machine travel, the machine is braked until it comes to a standstill and
the parking brake engaged once in standstill.
Cabin access on the left is the main access and exit! Use the window on
the right only in an emergency
– see "Emergency exit" on page 4-5.
Putting into operation
To Next Page
Loading...
Need help?
General
