BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-19
Maintenance 7
7.5 Cleaning and maintenance
Important information on cleaning and maintenance
The wrong choice of cleaning equipment and agents can impair the
operating safety of the machine on the one hand, and on the other put the
health of the persons in charge of cleaning the machine at risk. Therefore
always observe the following instructions.
Danger of electric shock from water in the vehicle electronics!
Water under high pressure may penetrate into the vehicle electronics and
may lead to severe injuries or death due to a short circuit.
► Do not clean electrical components (motors, power electronics,
instrument panels, connectors etc.) using a high-pressure cleaner.
Damage to machine due to cleaning work.
► Pay attention to the lower side in particular when cleaning the
machine. Do not allow dirt to collect on the motors or gearbox.
► Ensure that the hydraulic oil radiator fins (opt) are clean throughout
and not blocked.
► Do not damage the radiator fins when cleaning with a high-pressure
cleaner.
► Do not point the water jet of the high-pressure cleaner at the seals of
the piston rods of the hydraulic cylinders.
Machines with anti-corrosion protection (“aggressive media”) must be
cleaned separately – see "Machine preservation" on page 7-84!
l
In order to avoid damage to the environment, clean the machine only in
wash bays and places provided to this effect.
To Next Page
Loading...
Need help?
General
