BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-27
Operation 5
5.8 Heating, ventilation and air conditioning (only in cabin cpl.)
Heater and ventilation
The heating and ventilation system is an electrical air-heating. The system
is supplied with power by the battery. The higher the performance of the
heating and ventilation system, the higher the energy consumption. This
means that with increasing system output, the operating time of the
battery diminishes accordingly. Therefore, the performance of the heating
and ventilation system is limited.
When exterior temperatures are cold, we recommend
– to park the machine free-of-frost, in an enclosed space and
– if necessary, to de-ice the windows using some suitable foreign
substances.
The air that is accelerated by the fan is guided by two nozzles to the front
window, into the footwell area and towards the rear window
– see chapter 4 “Inside the cabin” on page 4-28.
Each nozzle can be directed and/or closed.
2 operating modes can be selected:
• Ventilation, fresh air
• Heating
The rotary switches 57 and 58 for adjusting the heating and ventilation are
located on the switch console below the steering wheel.
Ventilation, fresh air
1. Adjust the fan speed with rotary switch 58: positions 1–3.
Turning on the heating
1. Adjust the fan speed with rotary switch 58: positions 1–3.
2. Adjust the heating with the rotary switch 57: setting 0–2.
Turning off the heating
1. Turn rotary switch 57 to position 0.
To Next Page
Loading...