5-14 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Machine travel
The travel speed of the machine is proportional to the setting of the
accelerator pedal. The more the pedal is pressed, the higher the travel
speed. The adjustment control performed within the selected speed range
is infinitely variable.
Changing travel direction
Accident hazard when changing travel direction during machine
travel!
Changing the travel direction during machine travel can cause serious
injury or death.
► Do not operate the forward-reverse control during machine travel,
since the machine brakes abruptly and moves in the opposite direction
immediately.
► Only select the other travel direction when the machine is at a
standstill.
► Press the accelerator pedal carefully.
1. Reduce the engine speed. Remove your foot from the accelerator pedal.
2. Reduce the travel speed until the machine comes to a standstill.
3. If necessary, for example on a mountain or slope, brake and hold the
vehicle with the service brake.
4. Select the new travel direction with switch 55 on the joystick.
➥ The arrow for the old travel direction A or B and the indicator
display B/1 or B/2 in the digital display in the gauge go out.
➥ The arrow for the new travel direction A or B and the indicator
display B/1 or B/2 in the digital display in the gauge illuminate.
5. Press the accelerator pedal slowly.
➥ The machine travels in the opposite direction.
To Next Page
Loading...
Need help?
General
