Wacker Neuson KRAMER 5055e User Manual

BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-15
Operation 5
Slowing the machine and stopping
1. Reduce the engine speed of the hydraulic motor. Remove your foot
from the accelerator pedal.
2. If necessary, slow the vehicle using the service brake and stop.
3. Press button 56 on the joystick
➥ Indicator light A or B (arrow) and the indicator display B/1 or B/2 go
out in the digital display in the gauge.
➥ Indicator display B/4 illuminates in the digital display on the gauge.
➥ The travel direction is in the neutral position.
4. Apply the parking brake – see "Manual parking brake" on page 5-7.
Switching on the differential lock
The 100% front axle differential lock neutralizes the compensating effect
of the differential; i.e. traction is distributed evenly to both front wheels.
NOTICE
In order to avoid damage to the differential:
► Switch on the differential lock only if you expect a wheel to spin, when
working on slopes or on slippery ground, for example.
► Switch on the differential lock only at machine standstill.
► Switch off the differential lock when cornering.
Fig. 105
56
A
B
1
2
B
N
4

Wacker Neuson KRAMER 5055e Specifications

General

Brand	Wacker Neuson
Model	KRAMER 5055e
Category	Front End Loaders
Language	English