BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-7
Operation 5
Manual parking brake
Accident hazard if the parking brake is applied during machine
travel. The machine is braked abruptly!
Can cause injury.
► Apply the parking brake only at machine standstill.
► In machine travel operation use only the brake pedal to brake.
► Only use the parking brake in machine travel operation if the service
brake has broken down.
The manual parking brake can also be used as a secondary brake in the
meaning of StVZO. Applying the parking brake during machine travel
abruptly brakes the machine. For this reason, carefully observe the
corresponding safety instructions.
The drive of the machine is switched off if the parking
brake is applied (drive interlock). This is displayed by the illumination
of the indicator light 41.
After releasing the parking brake, the indicator light extinguishes and the
travel drive can be enabled again. Machine travel is possible only now.
Applying the parking brake prevents the machine from rolling away
unintentionally. The travel direction cannot be selected if the parking
brake is applied. The indicator light 41 illuminates continuously.
The switch panel with the press switch is located in
the instrument panel underneath the steering wheel.
Applying the parking brake manually
1. Press switch to position B.
➥ Indicator light 41 on the gauge illuminates.
➥ The parking brake is applied.
Releasing the parking brake manually
1. Press switch to position A.
➥ Indicator light 41 on the indicating instrument extinguishes.
➥ The parking brake is released.
To Next Page
Loading...
Need help?
General
