5-6 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Parking brake
Automatic parking brake
An automatic parking brake is installed in the machine, which is activated
as soon as the machine comes to a standstill or the operator presence
switch has been relinquished for 3 seconds.
If the machine comes to a standstill, a holding function "active standstill
control" is immediately enabled. The indicator display G/1 in the digital
display in the gauge briefly illuminates.
After about 3 seconds, the park function automatically applies and the
indicator light 41 in the indicating instrument blinks.
The machine drive is not switched off if the parking brake is automatically
applied. This is displayed by flashing 41 in the gauge.
As long as the indicator light flashes, machine travel can be immediately
resumed any time by pressing the accelerator pedal. The travel direction
can be changed. The indicator light 41 extinguishes as soon as machine
travel resumes.
To Next Page
Loading...
Need help?
General
