BA 357-00 * 3.0 * Sicherheit_E.fm 2-3
Safety 2
Required knowledge of operator
• The operator is responsible for other persons.
• Avoid any operational mode that might be prejudicial to safety.
• The specific national driving license is required.
• The vehicle may only be operated by authorized and safety-conscious
persons who are fully aware of the risks involved in
operating the vehicle.
• The operator must have received training about the location of the
machine's HV components and the potential hazards from the
machine's HV components. This training must be documented.
• The operator and owner are obligated to operate the vehicle only in a
safe and working condition.
• All persons working on or with the vehicle must have read and
understood the safety instructions in this Operator’s Manual before
starting work.
• Follow, and instruct the operator in, legal and other
mandatory regulations relevant to accident prevention.
• Observe and instruct the operator in regulations
regarding road traffic and environmental protection.
• Use only the defined accesses for getting on and off the vehicle.
• Be familiar with the emergency exit of the machine.
Preparatory measures for the operator
• Before starting, check the machine whether it can be driven and
operated safely.
• Tie back long hair and remove all jewelry.
• Wear close-fitting work clothes that do not hinder movement.
To Next Page
Loading...