2-8 BA 357-00 * 3.0 * Sicherheit_E.fm
2 Safety
Machine travel on public roads/sites
• The specific national driving license is required.
• Observe the national regulations
(for example, the road traffic regulations) during machine travel on
public roads/sites.
• Ensure that the vehicle is in compliance with the national regulations.
• In order not to blind other motorists, using the existing work lights
during vehicle travel on public roads/site is prohibited.
• When crossing for example underpasses, bridges, tunnels, ensure that
the clearance height and width is sufficient.
• The attachment fitted onto the machine must be certified for travel on
public roads/sites (see for example, the registration documents).
• The attachment fitted onto the vehicle must be empty and in transport
position.
• The mounted attachment must be equipped with the mandatory
lighting and protective devices.
• Take measures against unintentional operation of the operating
hydraulics.
• If the vehicle has different steering modes, ensure that the mandatory
steering mode is selected.
Stopping and securing the machine
• Only turn off the machine according to the Operator’s Manual.
• Before turning off the machine, lower the work equipment/attachment
to the ground.
• Unbuckle the seat belt only after turning off the machine.
• Before leaving the machine, secure it to prevent it from rolling away
(for example, with the parking brake, suitable wheel chocks).
• Remove the ignition key and secure the machine against unauthorized
operation.
• If the machine will not be used for a longer period of time, remove the
battery connector.
To Next Page
Loading...
Need help?
General
